>京显科技
>地址:北京市海淀区中关村南大街5号二区683号
>邮编:100081
>联系人:周小姐
>电话:18900616086
>传真:18900616086
>E-mail:changxian-el@hotmail.com
>> 网址:www.el-boy.com
你的位置:首页 >> 产业动态 >> 公司新闻  公司新闻
chemical eTape液位传感器
来源:TEKSCAN薄膜压力传感器 Tactilus压力分布测试 气体传感器 红外传感器 El冷光片_热电堆传感器厂家_热释电红外传感器_热电堆传感器应用电路_台湾热电堆传感器原厂_热电堆传感器应用_热电堆 电路_热释电红外传感器工作原理及结构说明_热释电传感器_红外传感器 | 发布时间:2021/12/29 | 浏览次数:
chemical eTape®液位传感器配备有聚四氟乙烯(FEP)护套,可用于化学品、石油和食品安全应用。 我们的chemical eTape®传感器完全组装在透明的椭圆形聚碳酸酯管中,以保护和稳定传感器。它有5英寸、8英寸、12英寸、15英寸、18英寸、24英寸、32英寸、48英寸、60英寸和70英寸尺寸。可提供标准分压器输出或0-5VDC输出或4-20mA输出。 如果您的应用程序需要自定义长度、配置或输出特性以适合特定应用程序,请与我们联系。 Milone Technologies, Inc eTape® liquid level sensors Home Shop About Us Contact Us Distributors About eTape® Data Sheets The eTape® is a solid-state sensor with a resistive output that varies with the level of fluid (liquid or powder). It does away with clunky mechanical floats and easily interfaces with electronic control systems. The eTape® sensor envelope is compressed by the hydrostatic pressure of the fluid in which it is immersed. This results in a change in resistance that corresponds to the distance from the top of the sensor to the surface of the fluid. The sensor's resistive ouput is inversely proportional to the height of the liquid. Therefore, the lower the liquid level, the higher the output resistance. Conversely, the higher the liquid level, the lower the output resistance. Product Data Sheets Available Here Specifications Nominal Length 8-inch 12-inch 24-inch 32-inch Sensor Length 10.2" (259 mm) 14.2" (361 mm) 26.0" (660 mm) 34.2" (869 mm) Active Length 8.4" (213 mm) 12.4" (315 mm) 24.34" (618 mm) 32.4" (823 mm) Sensor Output 400 - 1500 ohms ±20% 400 - 2000 ohms ±20% 400 - 4000 ohms ±20% 400 - 5000 ohms ±20% Ref Resistance 1500 ohms ±20% 2000 ohms ±20% 4000 ohms ±20% 5000 ohms ±20% Thickness: 0.015" (0.381mm) Width: 1.0" (25.4 mm) Actuation Depth: Nominal 1” (25.4 mm) Resistance Gradient: 150 ohms/inch (60 ohms/cm) Power Rating: 0.5 Watts (VMax = 10V) Resolution: < 0.01“(0.25 mm) Connector: Male Crimpflex Pins Temperature Range: 15°F - 150°F (-9°C - 65°C) Sensor Output The eTape® can be modeled as a variable resistor. The typical output characteristics of the sensor are show in the figure below. 数据表:
 
TAG:
 
打印本页 || 关闭窗口
 上一篇:eTape®位传感器
 下一篇:液位变化的电阻输出